With your vehicle ready, as outlined in Getting Connected, and your device set up, it's time to start the flash process.
Open the M-Flasher application on your device and log in (If you haven’t already done so now is the time to create your free account)
The application will perform all necessary checks on the Connect To Vehicle screen and look for your vehicle. Once you see “Ready!” appear, the Connect button will become enabled, and you will be ready to connect.
If you do not see “Ready!” and only see “Searching For Vehicle”, this indicates that the connection is not properly setup. Please refer to the Getting Connected guide.
Press the Connect button to enter the application.
Home Screen
The main screen will display your vehicle VIN, unlock status, and mileage. Selecting the top rectangle will reveal detailed information about your car, including unlock status and firmware information.
The home screen's center will contain optimizations available for your specific vehicle, such as Engine, Transmission, Hybrid, etc.
Datalog
Located at the far left is the “Datalog” tab
Datalogging allows users to record, share and delete datalog data for your vehicle.
Detailed information is available here:
Diagnostics
Located to the right of the “Datalog” tab is the “Diagnostics” tab
The “Diagnostics” tab contains adaptations and trouble codes.
Detailed Information is available here:
Settings
Located at the far right is the “More” tab
The “More” tab contains user account information, such as FAQ, Support, Datalog/License Access, etc
Detailed Information is available here:
Solutions
Located to the left of “More” tab is the “Solutions” tab
The “Solutions” tab contains brief explanations on some of the solutions Mission Tuning offers. Vehicle-specific solutions will be added in upcoming releases.
Detailed Information is avaible here: