With your vehicle ready, as outlined in Getting Connected, and your device set up, it's time to start the flash process.
Open the M-Flasher application on your device and log in (If you haven’t already done so now is the time to create your free account)
The application will perform all necessary checks on the Connect To Vehicle screen and look for your vehicle. Once you see “Ready!” appear, the Connect button will become enabled, and you will be ready to connect.
If you do not see “Ready!” and only see “Searching For Vehicle”, then the connection is not properly setup. Please refer to the Getting Connected guide.
Press the big Connect button to enter the application.
Home Screen
The main screen will display your vehicle VIN, Unlock status, and Mileage. You can click on the top rectangle to bring up a detailed info of your vehicle inlcuding unlock and firmware info.
Center of the screen will will contain Optimizations that are available for your specific vehicle such as Engine, Transmission, Hybrid, etc.
Datalog
Far left tab is the “Datalog” tab
Allows you to record, share and delete datalog data for your vehicle.
Detailed information is available here:
Diagnostics
To the right of Datalog tab, you will find Diag tab.
Contains Adaptations and Trouble codes.
Detailed Information is available here:
Settings
Far right tab labled “More”.
Contains User account information, FAQ, Support, Datalog/License access, etc
Detailed Information is available here:
Solutions
Located to the left of “More” tab
Contains brief explonations on some of the solutions Mission Tuning offers. Vehicle-specific solutions will be added in upcoming releases.
Detailed Information is avaible here: