...
Every optimization we provide can be customized by the end user to their likings prior to installation.
Number and specific customization will very by vehicle.
Can be applied to Original (stock) optimization base as long as the DME is unlocked for flashing.
The customization options have been field-tested and we only provide what is tried and safe.
Users can contact us at support@missiontuning.com to put in a request for a specific customization. If it is something that we beelive safe to be used, we can add it.
...
Begin Flashing
...
Button used to tell the application to prepare and flash the vehicle.
Make sure you followed the Getting Ready steps in the Getting Started guide.
Clicking Flash confirmation button will begin the process. The process can not be interrupted or stopped until flash is done.
Do not Open or Close doors during the process as doing so will turn off ignition and cause flash to fail.
Once the flash process starts, a progress screen will be displayed with will display current progres and flashing steps. Do not close or switch programs until the process is complete.
Upon completion, a tone will play and a “Done” button will turn green.
Note |
---|
If you get a message regarding ecu not being unlocked, then it means that this vehicle is not currently flashed by our new M-Flasher platform and current unlock status can not be read out. As long as you are sure that your ECU has been unlocked (either bench unlocked using M-Link or you are coming to us from other platform), you can select “Unlock Over-Ride” setting from the Flashing option below. |
...