...
Flashing Options (Advanced Users Only)
...
Top right of the screen is a “gear” icon. This brings up your Flashing control options.
Contents and options very based on Selected optimization (Original or 91/93/E30/etc)
Original:
Flash Type Selection.
Auto: Let the application decide on how to flash the vehicle based on current condition and flash state.
Full Restore: Restores the entire flash side of the ECU to the factory firwmare image. ECU will get re-locked after flash and no futher tuning will be possible until it is bench-unlocked again
Attemt Unlock: Mission’s AI targetting flashing. Our system will do everything in it’s power to flash original firmware and maintain DME unlock. If unlock fails, image will be restored with factory firwmare to let the user drive the car and get unlocked at later date.
Optimized (91/93/E30/etc)
Flash Type Selection.
Auto: Let the application decide on how to flash the vehicle based on current condition and flash state.
Force Full: Will force the ECU to get fully reflashed with fresh modified(optimized) firmware, maintaining unlock status as long as ECU has been previously unlocked.
Unlock Over-Ride
Auto: Let application read out the unlock status automatically.
Force Unlocked: Over-rides current state and tells the application to treat DME as if it has been bench-unlocked. Only should be used if ECU has been bench unlocked or user is moving from different platform and is currently flashed.
...