Page Comparison

...

• On the top of the screen, you will see a scrollable flash selector.

• It contains Contains all optimizations that are available for your vehicle. You can scroll left or right to select what optimization you want to install. (Original, 91, 93, E30, E50, etc).

  • Original refers to all original firmware file as it was delivered to you by the dealer

  • 91 refers to the optimization for 91octane. This flash was built specifically to be used by minimum of 91 octane (higher octane is permitted)

  • 93 referes to the optimization for 93 octane. Optimized to deleiver the most safe power on 93 octane, this flash can be used with the minimum of 93 octane fuel.

  • E30 flash is our ethanol-adaptive solution. Can be used on pump gas or blend of upto 40% ethanol for maximum power output.

  • E50 is adaptive between 25% and 50% ethanol content. Can not be used on pump-only gas.

  • E85 is our true ethanol flash that is desinged to be used on ethanol without any fuel blending. Fill up on any E85 station and off you go. Due to fueling limitations, this option has limited power output than E30 due to hardware fueling limitaton. Designed to be the cost-efficient solution to today’s gas prices for customers looking to increase output while incrasing mile-per-dollar.

...

• Button used to tell the application to prepare and flash the vehicle.

• Make sure you followed the Getting Ready steps in the Getting Started guide.

• Clicking Flash confirmation button will begin the process. The process can not be interrupted or stopped until flash is done.

• Do not Open or Close doors during the process as doing so will turn off ignition and cause flash to fail.

• Once the flash process starts, a progress screen will display current progres and flashing steps. Do not close or switch programs until the process is complete.

• Upon completion, a tone will play and a “Done” button will turn green.

• Depending on current firwmare state, teh flash will take anywhere from 40 seconds to 4 minutes.

...